Affiliate disclosure: This guide contains affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you. Learn more.
2026-11-16 · Setup guide
Affiliate disclosure: This guide contains affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you. Learn more.
Many of the best emulators for an Android handheld are not on the Google Play Store. Eden, the full ARMSX2 build, Azahar's Vanilla build, GameNative, Winlator, Vita3K and RPCSX all come as APK files from each project's own release page. Keeping them current means visiting every page by hand.
Obtainium does that for you. It checks each project's release page, tells you when there is a new version, and installs it. It is free, open source under the GPL 3.0 licence, and needs no account. It does not host any apps itself. It fetches the file the developer published, from the place the developer published it.
This guide is written against Obtainium 1.7.4, released on 1 November 2026.
The Short Version
- Obtainium is not on the Play Store. Get it from its GitHub releases page, F-Droid or IzzyOnDroid. On a handheld, take the arm64-v8a APK.
- Add an emulator by pasting the address of its release page into Add app.
- When a release has several APKs, set Filter links by regex so Obtainium always picks the right one. The table below has the filter for each emulator.
- Leave apps you installed from the Play Store to the Play Store.
- Turn on background update checks, and export your app list once you have set it up.
Step 1: Install Obtainium
Obtainium is not on the Google Play Store. It comes from three places:
- The project's GitHub releases page. Take the file named
app-arm64-v8a-release.apk. Every Android handheld we cover is 64-bit ARM. - F-Droid.
- IzzyOnDroid, a separate F-Droid style repository.
The GitHub build and the F-Droid build are the same code, and the project uses reproducible builds so anyone can check that. They do have different app IDs, though, so they install as two separate apps. Pick one and stick with it.
Android will ask you to allow installs from whichever app you used to open the APK. That is normal for any app from outside the Play Store. Our guide to downloading emulators safely covers what to check before you allow it.
Once Obtainium is installed, you can add Obtainium itself as an app, and it will keep itself updated too.
Step 2: The Settings That Matter on a Handheld
Open Settings in Obtainium. Most defaults are fine. These are worth a look.
- Background update checking interval. How often Obtainium checks for new versions. Once or twice a day is plenty for emulators.
- Enable background updates. Lets Obtainium download and install updates without you opening it. Obtainium's own text says background updates may not be possible for every app, and it can only tell whether a background install worked when you next open it.
- Disable background updates when not on Wi-Fi and when not charging. Handheld emulators can be large downloads. Turning on the charging limit means updates happen while the handheld sits on its charger.
- Battery optimisation. Obtainium notes that background downloads are more reliable if you switch it to its foreground service option, or turn off battery optimisation for Obtainium in Android's settings. Handhelds with aggressive power saving modes benefit most.
- Shizuku. Optional. Shizuku is a separate app that lets Obtainium install updates silently, without the Android confirmation prompt each time. You do not need root. If you have never used Shizuku, skip it and accept the prompts.
GitHub limits how often you can check. Obtainium notes that GitHub rate limits checks from apps that are not signed in, and that a GitHub access token avoids it. With the handful of emulators in this guide and a daily check, you are unlikely to hit the limit. If you see rate limit errors, add a token in the source specific section of Obtainium's settings.
Step 3: Add Your First Emulator
- Open the Add app tab.
- Paste the address of the emulator's release page into App source URL. Copy it from the emulator's official website, not from a search result. Many emulators have unofficial forks, and Obtainium will happily track a fork if you give it the fork's address.
- Obtainium works out the source type from the address. If it cannot, an Override source dropdown appears. Eden needs this, as the table below shows.
- Open Additional options and set the filter for that emulator from the table below.
- Tap Add. Obtainium checks the release page, shows the version it found, and offers to install it.
What the filter does. Many emulators publish several APKs per release: one per Android version, one per chip type, or one for a different device altogether. Without a filter, Obtainium asks you which file to install every time. Filter links by regex takes a short pattern, and Obtainium only considers files whose names match it. You do not need to know regular expressions. Copy the pattern from the table exactly, backslashes included.
Prereleases. Leave Include prereleases off unless you deliberately want test builds. ARMSX2's nightly builds and Azahar's release candidates are published as prereleases, so this setting is what keeps you on the stable builds.
The Emulator Table
| Emulator | Point Obtainium at | Settings | Notes |
|---|---|---|---|
| Eden (Switch) | The repository on Eden's own Git server, linked from eden-emu.dev | Override source: Forgejo (Codeberg). Filter: standard\.apk$, or legacy\.apk$ on a Snapdragon 865 | Eden's own handbook documents the override. Stable builds only |
| ARMSX2 (PS2) | ARMSX2's GitHub releases page | Filter: -a15- for Android 15 and newer, -a13- for Android 13 and 14, -a11- for Android 11 and 12, -legacy- for Android 10 and older or a Snapdragon 845 | Prereleases off, or you get nightlies. The Play build is a separate app |
| Azahar (3DS) | Azahar's GitHub releases page | Filter: vanilla | The Vanilla build. Prereleases on only if you want release candidates |
| GameNative (PC and Steam) | GameNative's GitHub releases page | Filter: v[0-9.]+\.apk$ | Skips the build for Quest headsets |
| Winlator (PC) | Winlator's GitHub releases page | None needed | One APK per release |
| Vita3K (PS Vita) | The main Vita3K GitHub repository | Filter: android. Version detection: Use release date as version string | Android builds now come from the main repository's rolling "continuous" release |
| RPCSX-UI-Android (PS3) | RPCSX's separate UI build repository | None needed | The main repository's releases stopped in April 2025 |
| aPS3e (PS3) | aPS3e's GitHub releases page | None needed | Only if you cannot use the Play Store. Play is easier |
For which Eden and ARMSX2 file your handheld needs, see our Eden setup guide and ARMSX2 setup guide. For the RPCSX build repository, see the RPCSX section of our aPS3e setup guide.
Apps to Leave on the Play Store
If you installed an emulator from the Google Play Store, keep updating it there. Obtainium can track many of these too, but mixing sources causes trouble. A build from a project's website can be signed differently from the Play build, and Android refuses to install an update over an app signed by someone else.
These are on the Play Store and are easiest left there: Dolphin, PPSSPP, melonDS, RetroArch, aPS3e, the Play build of Azahar and the Play build of ARMSX2.
Note that Azahar's Play build and ARMSX2's Play build use different app IDs from their APK builds. If you add the APK build to Obtainium as well, you end up with two copies of the emulator, each with its own settings and saves.
Crowdsourced Configurations: Check Before You Trust
Obtainium links to a site of crowdsourced app configurations from the footer of its settings page. Its own label for them is "use at your own risk", and that is fair.
When we checked on 16 November 2026, two emulator entries were out of date:
- Vita3K pointed at the project's old separate Android repository, whose last release was in June 2024. Current Android builds come from the main Vita3K repository.
- Lime3DS still has an entry. Lime3DS merged into Azahar in 2025 and its old address now redirects. Set Azahar up directly instead.
Configurations for Dolphin, PPSSPP and RetroArch exist too, including ones for Dolphin development builds and RetroArch nightlies. Those are useful if you want test builds, but read what each one points at before you import it.
Back Up Your App List
Once your emulators are set up, open the Import/export tab and export your Obtainium data. You can also turn on Automatically export on changes.
The export file is what makes a reset painless. On a new handheld, install Obtainium, import the file, and every emulator comes back with its filters and settings.
One warning from Obtainium itself: the export can include settings in plain text, including any GitHub token you added. Keep the file somewhere private.
Known Problems, and What to Do About Them
| Problem | What to try |
|---|---|
| Obtainium asks which APK to install every time | Add the filter from the table above |
| "No APK found" | The filter does not match the file names. Check it against the release page, character by character |
| An update will not install over the existing app | The installed copy came from a different source, usually the Play Store. Keep that app on its original source |
| It offers a test build | Turn off Include prereleases for that app |
| Rate limit errors | Check less often, or add a GitHub token in settings |
| Background updates never happen | Turn off battery optimisation for Obtainium, or use its foreground service option |
| Obtainium shows the wrong installed version | Open the app's page and use Mark updated, or reinstall it once through Obtainium |
Is Obtainium Safe?
Obtainium is open source, and it fetches the APK from the release page you give it, with nothing in between. That is safer than a mirror site, because there is no third party repackaging the file.
It cannot protect you from a bad address. If you paste the address of a fake project or an unofficial fork, Obtainium will keep that fake or fork updated just as faithfully. Always copy the address from the emulator's official website. Obtainium also shows each app's signing certificate hashes on its detail page, if you want to check them against what the developer publishes.
Frequently Asked Questions
Is Obtainium on the Google Play Store?
No. Obtainium comes from its GitHub releases page, F-Droid or IzzyOnDroid. On an Android handheld, take the arm64-v8a APK. The GitHub and F-Droid builds have different app IDs, so they install as separate apps. Pick one.
Can Obtainium update Eden?
Yes. Paste the address of Eden's repository on its own Git server, then set Override source to Forgejo (Codeberg), as Eden's handbook describes. Add the filter standard\.apk$, or legacy\.apk$ on a Snapdragon 865 handheld, so Obtainium picks the right one of Eden's APKs.
Why does Obtainium keep asking which APK to install?
The release has more than one APK. Open the app's settings in Obtainium and set Filter links by regex to a pattern that matches only the file you want. For ARMSX2 that is -a15-, -a13-, -a11- or -legacy- depending on your Android version.
Does Obtainium need root?
No. Without root, Android asks you to confirm each install. Optional Shizuku support lets Obtainium install silently without root. Background updates can work without either, though Obtainium notes they may not be possible for every app.
Should I use Obtainium for apps I got from the Play Store?
No. Keep Play Store apps on the Play Store. A build from a project's website can be signed differently, and Android will not install it over the Play version. Obtainium is for the emulators that are only available as APKs.
Is Obtainium safe?
It is open source and downloads straight from the release page you give it, with no mirror in between. The risk is the address you paste. Copy it from the emulator's official website, never from a search result or a video description, or Obtainium will keep a fake updated.
Why does Obtainium not see new Vita3K builds?
Vita3K publishes Android builds as a single rolling release whose name never changes. Point Obtainium at the main Vita3K repository, filter for android, and set version detection to Use release date as version string so each new build counts as an update.
Can Obtainium install nightly or test builds?
Yes. Turn on Include prereleases for that app. ARMSX2 nightlies and Azahar release candidates are published as prereleases. Leave it off if you want stable builds only.
Related Guides
- How to download emulators safely
- The best emulator for every system on Android handhelds
- Eden setup guide
- ARMSX2 setup guide
- Azahar 3DS setup guide
- GameNative setup guide
- Winlator setup guide
- Vita3K setup guide
- aPS3e setup guide, plus RPCSX
- Turnip and Mali drivers guide
Written 16 November 2026 against Obtainium 1.7.4. Menu names come from Obtainium's English interface text and its wiki, and each emulator's file names from its own release page, read the same day. We have not tested every filter through a full update cycle.

