Guide

Steam Deck Frame Generation in 2026: Free MAKO FG vs Lossless Scaling vs FSR 3

Steam Deck Frame Generation in 2026: Free MAKO FG vs Lossless Scaling vs FSR 3 — Setup guide for retro handhelds | Held Games

Affiliate disclosure: This guide contains affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you. Learn more.

2026-11-17 · Setup guide

Affiliate disclosure: This guide contains affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you. Learn more.

Frame generation adds made up frames between the real ones, so motion looks smoother than the game is actually running. On a Steam Deck, the flexible way to get it has always cost a little money. You bought Lossless Scaling on Steam and ran it through a Decky plugin.

That changed on 12 November 2026. MAKO 5.0 shipped its own frame generation model, MAKO FG, and it needs no Lossless Scaling at all. The headlines call it free frame generation for the Steam Deck. That is mostly right, with a few footnotes worth knowing.

This guide covers every frame generation option on the Deck, how to install MAKO, what has and has not been measured, and the cases where you should leave frame generation off.

The Short Answer

OptionCostWorks withHow you get itBest for
MAKO FG (MAKO 5.0)Free for personal useVulkan games, OpenGL games through Zink, and Flatpak emulatorsA Decky plugin you install from a ZIPTrying frame generation without paying
Lossless Scaling through Decky LSFG-VK$6.99 for Lossless Scaling on SteamVulkan games and Flatpak appsThe Decky store, or a newer ZIPThe proven route, used on Decks since 2025
FSR 3 frame generation in a game's menuFreeOnly games that ship itNothing to installAny game that offers it
Decky-FramegenFreeGames with DLSS. Other games are highly experimentalA Decky pluginDLSS games with no FSR 3 option

Our pick: if a game has FSR 3 frame generation in its own settings, use that first. It gets motion data straight from the game, so it guesses less. For everything else, try MAKO FG, because it costs nothing. Keep Lossless Scaling as the fallback with the longest track record.

And if a game already runs at the speed you want, leave all of this off.

What Frame Generation Does, and What It Cannot Do

A generated frame is a guess. The software looks at two real frames and draws what probably happened between them. That has three consequences.

  • It looks smoother, but it does not respond faster. Your inputs still land on real frames. A game running at 30 that is shown at 60 still feels like 30 in your hands.
  • It always adds some delay. To draw the in-between frame, the software has to wait for the next real one. How much delay depends on the method, but it is never zero.
  • The base frame rate matters most. The fewer real frames there are, the bigger the jumps it has to guess across, and the more mistakes you see.

MAKO's developer designs MAKO FG for a 30 fps base on handhelds, multiplied up to 120, and treats 60 to 120 as the easier target with fewer artifacts. Our view is simpler. Treat 30 as the floor, not the sweet spot. Our Multi Frame Generation explainer goes into why low frame rates and frame generation do not mix.

MAKO 5.0 and MAKO FG

MAKO is a community project for SteamOS and Linux. It comes in two parts. MAKO Decky is the plugin you see in the Quick Access Menu. MAKO Renderer is a Vulkan layer that sits between the game and the screen and does the actual work. It grew out of two older open source projects: the Decky LSFG-VK plugin, and lsfg-vk, the Linux layer that runs Lossless Scaling's frame generation.

Version 5.0 made MAKO FG the default model. What it offers:

  • Fixed 2x, 3x and 4x, or an adaptive mode that aims for a target frame rate.
  • Four quality modes. Quality, Balanced, Performance and Extra Performance. Balanced is the default. The cheaper modes reuse motion between frames to save GPU time.
  • HUD protection. A separate stage keeps static text and crosshairs from smearing.
  • Experimental HDR through Gamescope.

MAKO also does more than frame generation. It has its own spatial scaler, bundled sharpening and retro shaders, per-game profiles, and setup helpers for Heroic, Lutris and EmuDeck. The project says it uses AI coding agents in development, with people owning review and release decisions.

What "free" means here

This is the footnote the headlines skipped. MAKO is two different kinds of free.

  • MAKO Decky and MAKO Renderer are open source, under the GPL.
  • MAKO FG is not open source. Its weights are published under a Creative Commons non-commercial licence, and the program that runs them is published only in binary form. Part of its training data was licensed for non-commercial research and education only, and the model card passes that condition on to every user.

For you, playing your own games on your own Deck, that means free. It does not mean anyone may build it into something they sell.

One more surprise. The model is tiny. It has 211 learned parameters, under 1 KB of weights. Most of the work happens in motion analysis stages, and the small learned part blends the two real frames together once the motion is known. It is a very different thing from the big neural networks behind DLSS.

How to Install MAKO on a Steam Deck

MAKO is not in the Decky store. You install it from a ZIP, which means turning on Decky's Developer Mode. Only download that ZIP from the project's own releases page. A plugin installed this way skips the store's review.

  1. Install Decky Loader if you have not already. It runs in Desktop Mode once, then lives in Game Mode. Our Decky-Nexus guide shows what that plugin menu looks like.

  2. Download the latest MAKO Decky ZIP from the project's releases page. Search for "MAKO Decky" to find it.

  3. In Decky's settings, turn on Developer Mode. Then go to Developer, choose Install Plugin from Zip, and pick the file.

  4. Open MAKO Decky and press Install MAKO Renderer. This step matters. Installing the ZIP alone does not install the renderer.

  5. Add a launch option to the game. In Steam, open the game's Properties, then Launch Options, and enter:

    /home/deck/.local/bin/mako-run %command%

  6. Start the game and open MAKO in the Quick Access Menu. Turn on Frame Generation and pick MAKO FG. The project suggests starting at Fixed 2x with scaling off and a 30 fps cap, then changing one thing at a time.

  7. Check it is really on. MAKO's Live Status panel should show Model: MAKO FG. A saved setting alone does not prove anything is being generated.

You do not need Lossless Scaling for any of this. You only need it if you want MAKO to use Lossless Scaling's own model or its LS1 scaler. In that case MAKO asks for the default public version of Lossless Scaling, not a beta branch.

To update MAKO, close your games, uninstall MAKO Decky, install the newer ZIP the same way, and restart the Deck. Then open MAKO and press Install MAKO Renderer, or Update if it offers one. Your profiles and launch options are kept.

If the plugin does not appear after installing, uninstall it, install the ZIP again and restart. That fix comes from the project itself.

You may also come across Decky MultiFrameGen, a separate unofficial plugin that bundles MAKO FG. We stick with MAKO's own plugin, because it comes from the same project as the model.

The Honest Steam Deck Status

MAKO runs on the Deck. The project says it is developed and tested on AMD graphics with the Mesa driver, the Steam Deck included. What has not been published is how much it costs on the Deck.

  • Every published timing comes from a Steam Machine class GPU. MAKO FG's model card reports 0.58 ms of GPU time per pair of real frames at 1280x800 and 2x, in Quality mode. That is the Deck's resolution, but not the Deck's chip.
  • The 0.55 ms figure in some coverage is the 720p result on that same GPU. It is not a Steam Deck number either.
  • The model card says so itself. It calls other devices "design targets until they are measured."
  • The Deck's GPU is much smaller than the Steam Machine's, so expect a higher cost on the Deck. Our Steam Machine vs Steam Deck comparison covers the gap.

The project is also open about where its output still goes wrong. Its own test notes report a few torn frames on repeating patterns, like stairs and railings, and torn text on a menu right after it scrolls. Its documentation says fast reversals can beat the motion search in the cheaper modes, and suggests Quality mode if you see artifacts. It also says plainly that a game launching with MAKO does not prove good quality, latency or speed.

That is a refreshingly honest set of warnings. It means you should judge it with your own eyes, game by game.

Frame Generation for Emulators Through EmuDeck

This is the part we find most interesting. MAKO documents a setup for EmuDeck, so it can work on emulated games too.

  1. In MAKO Decky, open Flatpak Setup. Prepare each Flatpak emulator you want to use and install its matching extension.
  2. Set the emulator to its Vulkan renderer. MAKO works as a Vulkan layer. For an OpenGL only program, the project suggests trying Zink.
  3. Edit each game's Steam shortcut in Desktop Mode. Set Target to /home/deck/.local/bin/mako-run and Start In to /usr/bin. Keep the Launch Options EmuDeck wrote, including the game path and flags.

AppImage emulators skip the Flatpak steps. They use the same /home/deck/.local/bin/mako-run %command% launch option as a Steam game instead. Either way, it is per game work, so pick a handful of games rather than your whole library.

Where it helps: 3D games locked at 30 fps. Plenty of PS2, GameCube, PS3 and Xbox 360 games run at 30 by design. If the game is slow paced and your Deck already holds 30 steadily, frame generation can make camera pans look far smoother.

Where to skip it:

  • 2D pixel art. Generated frames smear sharp pixel edges, and most 2D games already run at 60.
  • Rhythm games, fighting games and shmups. These are built on precise timing, and any added delay changes how they play.
  • Anything struggling below 30. Frame generation multiplies what is there. It cannot rescue a game that is already stuttering.

Try a real fix first. Many 30 fps games have community patches that make them run at a true 60, which beats a generated 60 every time. See our lists of PS3 and Xbox 360 games with 60 fps and 4K patches, and how to unlock frame rate and resolution in those emulators. Our Steam Deck retro gaming guide covers the settings to get right before any of this.

Lossless Scaling Through Decky LSFG-VK

Before MAKO FG, this was the way to get frame generation in any game on a Deck. Lossless Scaling is a $6.99 Windows app on Steam. On the Deck, a Linux layer called lsfg-vk runs its frame generation, and the Decky LSFG-VK plugin installs and sets it up for you.

  • It is in the Decky store, though the newest versions come as a ZIP from the plugin's own releases page.
  • It offers 2x, 3x and 4x, plus a flow scale slider, a performance mode and FP16.
  • It has a Flatpak tab for emulators and other Flatpak apps.
  • It needs your own copy of Lossless Scaling, installed through Steam.

One trap if you try both. The Decky LSFG-VK plugin asks you to switch Lossless Scaling to a beta branch called lsfg-vk. MAKO asks for the default public version. Follow the instructions for the plugin you are actually using, and do not turn both on for the same game.

Lossless Scaling's main advantage now is its track record. Its main cost is latency, because it works from the finished image with nothing from the game to help it. Our Multi Frame Generation explainer covers that trade off in detail.

FSR 3 Frame Generation in the Game's Own Menu

If a game offers FSR 3 frame generation in its graphics settings, use it first. It is free, there is nothing to install, and it uses motion data from the game itself. That usually means fewer artifacts than any outside tool can manage.

The catch is coverage. Only games whose developers added it have it. Our FSR and XeSS guide covers the settings to pair with it.

Decky-Framegen for Games With DLSS

Decky-Framegen is a free Decky plugin built on OptiScaler. It swaps a game's DLSS calls for FSR 3 frame generation and FSR or XeSS upscaling, so a game that only supports NVIDIA's features can use AMD's on the Deck.

It works best in games that already support DLSS. Its own README calls its option for games with no frame generation at all "highly experimental". Like every tool of this kind, it works by injecting into the game, so keep it to single player games. Anti-cheat systems look for exactly this.

LCD or OLED: Know Your Target

Your screen decides how many frames are worth generating.

  • Steam Deck LCD: 60 Hz. The useful target is 30 to 60 at 2x. Anything above 60 is wasted GPU time.
  • Steam Deck OLED: up to 90 Hz. You can go 45 to 90 at 2x, or 30 to 90 at 3x. MAKO's model card singles out 3x as the model's strong point, because the two generated frames share the motion work. A 45 base still responds better than a 30 base, so try both and keep the one that feels right.

Whichever you own, cap the base frame rate so it stays steady. Frame generation copes much better with an even rhythm of real frames than with one that jumps around.

The OLED's 90 Hz screen gives frame generation more room to work with. If you are choosing a Deck for this, that is the one. Our Steam Deck OLED review covers the rest of the differences.

Not for ARM Handhelds

MAKO only ships for x86_64 Linux. The project says plainly that it has no ARM packages. It does nothing on an Android handheld or an Anbernic.

Android does have its own frame generation, built on the same Lossless Scaling idea. GameNative offers it for PC games, and the ARMSX2 build from its official site offers it for PS2. Both need your own copy of Lossless Scaling.

Frequently Asked Questions

Is MAKO frame generation really free?

For playing your own games, yes. MAKO's plugin and renderer are open source under the GPL. MAKO FG itself is different: its weights are under a Creative Commons non-commercial licence, the program is published only in binary form, and part of its training data is licensed for non-commercial research and education only. Free to use at home, not free to build into something you sell.

Do I need Lossless Scaling to use MAKO?

No. MAKO FG, MAKO's scaler and its shaders all work without it. You only need Lossless Scaling if you want MAKO to use Lossless Scaling's own frame generation model or its LS1 scaler.

Is MAKO in the Decky Plugin Store?

No, as of 17 November 2026. You install it from a ZIP after turning on Developer Mode in Decky's settings. Download that ZIP only from the project's own releases page, because plugins installed this way skip the store's review.

Has anyone measured MAKO FG on a Steam Deck?

Not publicly, as of 17 November 2026. The published timings come from a Steam Machine class GPU. The 0.55 ms figure in some coverage is its 720p result on that GPU. The model card itself calls other devices design targets until they are measured.

Does frame generation work with emulators on the Steam Deck?

Yes, through both MAKO and Decky LSFG-VK, as long as the emulator uses Vulkan. MAKO documents a full EmuDeck setup. It suits slow paced 3D games locked at 30 fps. Skip it for 2D games, rhythm games, fighting games and shmups, and try a real 60 fps patch first where one exists.

Does frame generation add input lag?

Yes, always some. It has to wait for the next real frame before it can draw the one in between, and your inputs still only register on real frames. It makes motion look smoother. It does not make a game respond faster.

Should I use MAKO FG or Lossless Scaling?

Try MAKO FG first, because it is free. Keep Lossless Scaling as the fallback if MAKO FG shows artifacts you cannot live with in a particular game. Lossless Scaling has been used on Decks for longer. Do not turn both on for the same game.

Does MAKO work on a ROG Ally or Legion Go?

Only under SteamOS or another Linux, where Decky Loader runs. It does nothing on Windows. The project develops and tests on AMD graphics, and calls NVIDIA and Intel community tested.

Can I use MAKO on an Android handheld?

No. MAKO ships x86_64 Linux packages only. On Android, GameNative and the official ARMSX2 build offer frame generation through your own copy of Lossless Scaling instead.


Written 17 November 2026 from MAKO's own README, launcher guide, frame generation documentation, model card and release page, the Decky LSFG-VK and Decky-Framegen READMEs, and Steam's store data for Lossless Scaling. We have not benchmarked MAKO FG on a Steam Deck ourselves.

Related reading