Affiliate disclosure: This guide contains affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you. Learn more.
2026-11-18 · News and analysis
Affiliate disclosure: This guide contains affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you. Learn more.
Star Wars Rogue Squadron II: Rogue Leader was a GameCube launch game in 2001. Factor 5 pushed the console harder than almost anyone else ever did, and the result has been a stress test for the Dolphin emulator ever since.
On 18 November 2026, version 1.0 of Red Two arrived. It is a static recompilation. The game's PowerPC code is translated to C++ ahead of time, then runs on a native runtime that stands in for the console. There are Windows and Linux builds, and the Linux one is packaged as an AppImage for the Steam Deck.
We read the project's documentation and its full commit history, and we checked its downloads without running them. Here is why this game in particular matters, what Red Two does, and what to keep in mind about a project that is only two weeks old.
Everything here assumes you are playing a game you already own. We do not link to game files or dumping tools, and we do not explain how to obtain either.
The Short Version
- What it is: an unofficial native PC port of the GameCube game, made by static recompilation. There is no CPU emulation.
- Released: version 1.0 on 18 November 2026. It was hours old when we wrote this.
- What it adds: widescreen up to 21:9, up to 4K, 60, 90, 120 or 144 fps at normal game speed, RetroAchievements, save states, cheats, and support for Dolphin texture packs and codes.
- What you need: your own disc image of the USA release, GSWE64 revision 0. Other regions do not work.
- Steam Deck: there is an AppImage. The project's own notes log the first mission at 59.6 to 59.9 fps in its Deck testing.
- The caveats: it is brand new, it comes from a single developer working with Claude, and nobody else has posted results yet.
Why Rogue Squadron II Was So Hard to Emulate
Most GameCube games use memory in a straightforward way. Rogue Leader does not.
The game hides a second program inside its main executable. It runs that program from its own virtual memory, which it pages in and out on demand. To do that, it uses the GameCube's memory management unit, plus the console's auxiliary memory as swap space. Very few games went that far.
Dolphin calls these Full MMU games. For years they could not use fastmem, the shortcut that lets Dolphin handle memory access quickly, so they ran through a much slower path. That is why Rogue Leader stuttered and slowed down even on hardware that ran almost everything else at full speed.
Dolphin's March 2026 release changed that on desktop. Our article on Dolphin 2603 covers the fastmem fix that finally unblocked the Rogue Squadron games, and why the gains are confirmed on x86 but still untested on Android.
Red Two goes around the problem instead. It does not need a general solution for every Full MMU game. Its recompiler finds the game's functions without any symbols and writes them out as C++, and that includes the hidden second program. Its runtime has its own version of the console's memory management, and when the game asks for a page that is not loaded, the game's own paging code handles it. Everything is built around this one game.
The other pieces:
- Graphics go through Aurora, a reimplementation of the GameCube's graphics library. It is the same renderer behind Dusklight, the Twilight Princess PC port.
- Sound comes from an emulation of MusyX, the audio system that runs on the GameCube's sound chip, at the level of its command lists.
- The rest of the hardware, like video, the disc drive and controllers, is modelled at the register level by the runtime.
What Version 1.0 Does
| Feature | What version 1.0 offers |
|---|---|
| Aspect ratio | 16:9, 16:10, 21:9 or match your window, with the game's culling, HUD, menus and cutscenes adapted |
| Resolution | Up to 4K internally |
| Frame rate | 60, 90, 120 or 144 fps, with the game still running at its normal speed |
| Achievements | RetroAchievements, softcore only, signed in from the in game menu |
| Saves | The game's own memory card saves, plus eight save state slots |
| Mods | Dolphin format HD texture packs, Gecko and Action Replay codes, and save import from Dolphin |
| Extras | Cheats, the game's passcode unlocks without typing codes, Xbox button prompts and fast loading |
| Platforms | Windows 10 and 11, and Linux, with an AppImage for the Steam Deck |
Why there is no 32:9. The project removed it before release, and the reason ties straight back to the memory story. At 32:9 the wider view made the game keep more in its virtual memory than its 1,536 swap slots can hold. The Battle of Hoth intro stopped with the game's own "Out of ARAM memory" error. At 21:9 the game uses about 1,014, so 21:9 is now the limit, and wider screens get bars at the sides.
Fixes found in play. The release lists crash and glitch fixes in Battle of Hoth, Prisons of the Maw, Revenge on Yavin and Vengeance on Kothlis, plus the end credits. The zigzag pattern over Hoth's sky is also off by default. It is the game's own dithering, made for a 480 line picture, and a setting brings it back if you want it.
Fast loading. The emulated disc drive reads at 200 MB per second instead of the GameCube's 3. The project says that saves about 16 seconds of drive time on the hangar and Battle of Hoth loads.
Codes have one limit. Because the game's code is translated ahead of time, any cheat code that rewrites that code cannot work. The menu marks those codes as not supported. Codes that only change values in memory are supported.
Coming from Dolphin? Red Two can find your Dolphin folder and import this game's newest save, its texture packs and its codes, with their on and off states. You can also sign in to RetroAchievements with your existing Dolphin login. Our RetroAchievements setup guide covers the account side.
On the Steam Deck
Red Two supports the Deck from day one. The setup is the usual AppImage routine.
- Download the AppImage in Desktop Mode and make it executable.
- Put your disc image next to it. Any file name works. If you use EmuDeck, Red Two also looks in its GameCube folder, so a disc already set up for Dolphin will be found. Our EmuDeck setup guide covers that layout.
- Add it to Steam as a non Steam game so it shows up in Game Mode.
On first start it detects a Deck and goes fullscreen at the Deck's own aspect ratio.
The numbers are the project's own. On 15 November its notes record a fix for a crash specific to SteamOS's graphics driver. After the fix, they log 14 runs without a crash and the first mission at 59.6 to 59.9 fps on a Deck. Two days later, another fix landed for an out of memory crash about five minutes into Vengeance on Kothlis on the Deck. Both fixes are in version 1.0.
Two more Deck details. Texture prefetch, which loads a whole HD texture pack into memory before the game starts, is switched off on the Deck. That is because the Deck's 16 GB of memory is shared with its graphics chip. And the Linux build needs glibc 2.38 or newer, which any current SteamOS has.
If you would rather stay with Dolphin on your Deck, our guide to playing GameCube games on Steam Deck covers it. Make sure you are on Dolphin 2603 or newer for this game.
Android and Windows Handhelds
Windows handhelds like the ROG Ally and Legion Go can use the Windows build. Any of them clears the AVX2 requirement. No one has posted results from one yet, but the Deck numbers suggest they have plenty of headroom.
Android is a no for now. A commit on release day started an Android port, with touch controls. The notes say it "builds and starts in the emulator but hangs early in boot", and the port is shelved and unreleased. On an Android handheld, Dolphin is still the route. Our GameCube and Wii emulation guide has our Snapdragon figures for this game, and the Dolphin Android setup guide covers the settings.
Not the First GameCube Recompilation
Red Two is not the first static recompilation of a GameCube game.
- Luigi's Mansion Recompiled is already past version 1.1, with Windows, Linux and Apple Silicon Mac builds.
- A Skies of Arcadia Legends recompilation is in beta, with Windows, Linux and Mac builds, and even an Android one.
- Projects exist for Eternal Darkness, Kirby Air Ride and Sonic Riders, among others, along with a general toolkit called DolRecomp.
What makes Red Two stand out is the game it picked. Rogue Leader was one of the hardest GameCube games to emulate, and Red Two arrives with a long feature list and fixes already in place.
One more name to keep apart. The first Rogue Squadron, on the N64, has its own recompilation, which is a separate project. Our recompiled games list tracks all of these by system.
Built in Two Weeks, With Claude
Red Two moved very fast. Its commit history starts on 5 November. The notes say the first mission was playable about three hours after the first commit. Version 1.0 followed 13 days later.
Every commit in its history carries a co-author line for Claude Opus 5.5. The project also keeps a CLAUDE.md file, the notes file the Claude Code tool reads. The README does not mention AI at all, but the commit history is public, so the AI use is visible to anyone who looks.
That is not a reason to avoid it. It is a reason to apply the usual caution to any brand new project. The commit notes are unusually detailed about what was tested and how, which is a good sign. But as of release day, nobody besides the developer had posted a result anywhere we could find, and the issue tracker was empty. Our piece on how the recomp scene split over AI covers how to judge projects like this one.
One more thing to know about the download. Red Two's prebuilt downloads contain the game's code in recompiled form, though none of its data. That is a legal grey area that some projects avoid. The PS3 port in our Asura's Wrath article, for example, makes you build it on your own PC because it will not distribute translated game code. Red Two offers both routes. You can download the finished build, or build it yourself from your own disc.
What You Need
- Your own disc image of Rogue Squadron II: Rogue Leader, USA release, GSWE64 revision 0. It can be an .iso, .gcm, .rvz or .wia file. The European and Japanese releases are not supported.
- Windows 10 or 11, 64 bit, or Linux with glibc 2.38 or newer. Any current SteamOS qualifies.
- A processor with AVX2. That means Intel Haswell from 2013 or later, or any AMD Zen chip.
- A graphics card with Direct3D 12 or Vulkan.
- Optional extras: a Dolphin format HD texture pack, and your existing Dolphin save.
Frequently Asked Questions
Is there an official PC version of Rogue Squadron II?
No. Rogue Leader came out on the GameCube in 2001 and has never been re-released on any platform. Red Two is an unofficial fan project, and you need your own disc to use it.
Is Red Two an emulator?
Not in the usual sense. The game's code is translated ahead of time and runs natively on your processor, so there is no CPU emulation. The runtime still stands in for the rest of the console, including an emulation of its audio chip, which is normal for a static recompilation.
Does Red Two work on the Steam Deck?
Yes. There is an AppImage you add to Steam as a non Steam game. The project's own notes log the first mission at 59.6 to 59.9 fps on a Deck. These are the developer's figures, and other players have not reported results yet.
Which version of the game do I need?
The USA release, with the disc ID GSWE64, revision 0. The European and Japanese releases do not work, because the program has to match exactly.
Does it support RetroAchievements?
Yes, in softcore mode only, so save states and cheats stay usable. You sign in from the in game menu, or reuse your Dolphin login.
Can I use my Dolphin texture packs and saves?
Yes. Red Two reads HD texture packs in Dolphin's format from any folder, and it can import this game's newest save, texture packs and codes from your Dolphin setup.
Do Gecko and Action Replay codes work?
Most do. Codes that change values in memory work. Codes that rewrite the game's program cannot, because that program has already been translated, and the menu marks those as not supported.
Is there an Android version?
No. An Android port was started and then shelved, because it hangs early in boot. On an Android handheld, Dolphin is still the way to play this game.
Is Red Two better than Dolphin for this game?
On a PC or a Steam Deck it offers things Dolphin does not, like 144 fps at normal game speed, widescreen with adapted culling, and its own crash fixes. Dolphin has also improved a lot for this game since its March 2026 release. Red Two is hours old, so Dolphin is the better tested option for now.
What about Rogue Squadron III: Rebel Strike?
Red Two only covers Rogue Leader. Rebel Strike is still a Dolphin game, and it is the one that gained the most from Dolphin's March 2026 memory fix.
Related Reading
- Dolphin in 2026: Triforce Arcade Support and a 97.8% Compatibility Rate
- How to Play GameCube Games on Steam Deck
- 20 Best GameCube Games for Handheld Emulation
- GameCube and Wii Emulation on Handhelds
- Recompiled Games List: Every Native PC Port by System
- Dusklight 2.0's Randomizer Got the Headlines
- Recompiled Games on Android: Every Port You Can Install
- The Recomp Scene Split Three Ways Over AI
- Steam Deck OLED Review
Written 18 November 2026 from Red Two's release notes, README and commit history. We checked the downloads against their published checksums and inspected their contents, but we did not run either build, and we have not benchmarked it on any hardware. Every frame rate quoted is the developer's own. This page will be dated again rather than quietly rewritten when things change.

