Guide

Asura's Wrath Runs Natively on PC at Version 1.0, if Your Disc Is European

Asura's Wrath Runs Natively on PC at Version 1.0, if Your Disc Is European — News guide for retro handhelds | Held Games

Affiliate disclosure: This guide contains affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you. Learn more.

2026-11-17 · News and analysis

Affiliate disclosure: This guide contains affiliate links. As an Amazon Associate, we earn from qualifying purchases at no extra cost to you. Learn more.

Asura's Wrath never came to PC. Capcom released CyberConnect2's anime brawler on PS3 and Xbox 360 in 2012, and that was it. For years the only way to play it on a computer was an emulator.

As of 16 November 2026 there is another way. A fan project has released version 1.0 of a native PC port of the PS3 version, made by static recompilation. It promises everything the news doing the rounds says: up to 4K, high frame rates, controller support, trophies and a Steam Deck install.

Most of that checks out. Some of it needs a footnote. One thing needs fixing before we would tell you to run the installer. We downloaded both packages and read through them without running either one. Here is what we found, which copy of the game it needs, and what to use if your disc is not the right one.

Everything here assumes you are playing a game you already own. We do not link to game files, key files, firmware, or dumping tools, and we do not explain how to obtain any of them.

The Short Version

  • What it is: an unofficial port of the PS3 version. The game's PowerPC code is translated into C++ and compiled into a normal PC program. No emulator and no PS3 firmware are involved.
  • Released: version 1.0 on 16 November 2026. It was one day old when we wrote this.
  • What it does: internal resolution from 640x360 up to 4K. 30, 60 or 90 fps, plus an experimental 120 fps mode. Any modern controller works, with PlayStation, Xbox or Switch button prompts. Update 1.02, the DLC episodes and all 53 trophies are supported.
  • The catch you cannot work around: it only accepts the European PS3 disc (BLES01227). Other regions use a different program and do not work yet.
  • Steam Deck: there is an install script, and it adds a Game Mode shortcut. The developer says there has been no performance testing yet.
  • Before you run anything: as of 17 November, the project's published checksums do not match either download. The likely cause is harmless, but it should be fixed first.
  • Everyone else: if you own the Xbox 360 version, there are separate native ports of that. One of them even has an experimental Android build.

What the PS3 Port Actually Is

Most native ports of games from this era start from the Xbox 360 version. The PS3 is harder. Its Cell processor has one PowerPC core, which is the easy part, but games also lean on the SPUs. Those are small coprocessors with their own instruction set. Our PS3 recompiled games list explains why that kept the PS3 scene years behind the 360.

This project takes on the PS3 version directly. It also does not use the shared toolkit that many other PS3 projects are built on. It has its own recompiler and its own runtime.

The recompiler maps nearly 48,000 functions in the game's program and turns them into C++. It is tested instruction by instruction against QEMU, a standard emulator of the same processor family. The runtime then plays the part of the PS3 around that code. It handles the system calls, files and threads. It runs the SPU programs, first through an interpreter and then as native code translated ahead of time. And it draws the graphics through OpenGL 4.5.

The most unusual part is how you get it. The download does not contain the game. It contains the port's own source code and a setup tool. The port is then built on your own PC from your own copy. That is because the finished program contains the game's translated code, which the project will not distribute. The Windows build takes about 10 minutes on an 8 thread processor. On a Steam Deck, the project says to expect one to two hours.

What It Does

FeatureWhat version 1.0 offers
ResolutionInternal 640x360 up to 4K, or your screen's native resolution
Frame rate30 like the console, 60 or 90. 120 is experimental
ControlsAny controller SDL recognises, with rumble, or the keyboard
Button promptsPlayStation, Xbox, Switch or keyboard, or matched to your controller
ContentThe main story, update 1.02 and the DLC episodes, read from wherever they sit
TrophiesAll 53, with pop ups in game and a list in the launcher
ExtrasOptional removal of the cutscene letterbox, a save backup button, a launcher in seven languages
PlatformsWindows 10 and 11. Linux and Steam Deck are experimental

The DLC support matters more here than in most games. Asura's Wrath saves its true ending for a paid DLC episode, so a port without DLC gives you an unfinished story. This one reads the DLC you already have installed.

The trophies are the port's own. It stores them itself, and they have nothing to do with PSN. If you would rather track trophies through an emulator, our RPCS3 trophies explainer covers how that works and why they never sync.

Performance, by the developer's own numbers. The test PC has a 4 core, 8 thread processor and an RTX 5060, running at 1080p. On it, the heaviest fights run at 80 to 86 fps in 90 fps mode and 113 to 118 fps in 120 fps mode. That is one machine, measured by the person who wrote the port, so treat it as a best case.

Expect some stutter the first time you play each area. The port records the SPU programs the game uses as you play, then translates them to native code the next time you press Play. It gets smoother the more you play.

What We Checked in the Download

This is a brand new project, so we did not take the release notes on trust. We downloaded both packages and inspected them without running either one.

The good news first.

  • Both packages contain the full source code. That means the recompiler, the runtime, the launcher and the tests. What it says it is matches what is in the box.
  • The Linux install script is short and readable. It builds with standard tools, or inside a container made from the official Arch Linux image. It downloads nothing from anywhere unusual.
  • The Windows installer carries the same source files. The only things it downloads are the official MSYS2 build tools, from MSYS2's own servers.

The part that needs fixing.

  • The checksums do not match. The release publishes SHA-256 checksums, so you can confirm your download is the original. As of 17 November, neither download matches its published checksum. Both files are also larger than the release notes say.
  • The likely cause is innocent. The Linux package is bigger by almost exactly the size of the launcher artwork inside it. That suggests the files were repackaged after the checksums were written. But a checksum is the only way an unsigned installer can prove it is the real one, so until they match, that check is broken.
  • The installer is not signed. Windows SmartScreen will warn you and ask you to choose Run anyway. The project says so itself.
  • The project page holds only a description. The source lives inside the downloads, and the page's own links point to a project page that does not exist. Some hobby projects do this to make takedowns harder, so it is not a red flag on its own. It does mean there is no public history of changes to read.

The track record helps. The same developer released a native port of the Wii game Pandora's Tower in October, using the same build on your own PC approach. It has since reached version 1.2. Its issue tracker shows real players reporting real bugs and the developer replying with fixes. That points to a genuine developer with a method that works. It is also a useful warning for the next section.

Our advice is to wait a few days if you can. Give the developer time to fix the checksums. Give other players time to report whether it really runs start to finish. We will update this page when either happens.

The Steam Deck Picture

The news says Steam Deck support. That is true in the sense that there is an install path. It is not yet true in the sense of anyone knowing how well it runs.

Here is what the Linux package does on a Deck. SteamOS will not let you install build tools on its read only system. So the script builds the port inside a distrobox container, which the project says SteamOS 3.5 and later include. The first build takes one to two hours on the Deck.

It then sets Deck friendly defaults: 60 fps, the PS3's native 720p internal resolution, console sized shadows, fullscreen and Xbox button prompts. Finally it creates a shortcut that you add to Steam as a non Steam game, so you can launch it from Game Mode.

The project's own status table is blunt about the rest. Steam Deck support is "experimental", installed "through distrobox", with "no performance testing yet". Its Linux notes suggest dropping to 0.75x resolution at 60 fps if it struggles, and trying 90 fps in quieter areas on an OLED Deck.

Two cautions before you spend two hours on a build.

  • The developer's last Deck path has open problems. Pandora's Tower also gained a Steam Deck install, and two Deck reports are still open on its tracker. In one, the install fails. In the other, the game hangs on its loading screen. Neither is about Asura's Wrath, but it is the same developer and the same approach.
  • The only Deck report for any version is not encouraging. The original Xbox 360 recompilation has an open report of lag in the opening scene on a Deck. That is a different project, but it is the only Deck result for this game so far.

If you want Asura's Wrath on a handheld today with known results, RPCS3 has been able to play the PS3 version start to finish for years. Our guide to PS3 emulation on handhelds covers what a Deck can do with it.

Which Disc You Own Decides This

This is the part that decides whether any of this helps you.

What you ownWhat to use
Asura's Wrath on PS3, European disc (BLES01227)This PS3 port. It is the only version with trophies, 90 fps and a Steam Deck script
Asura's Wrath on PS3, any other regionNot supported yet, because the program differs. RPCS3 is your route for now
Asura's Wrath on Xbox 360The Xbox 360 native ports in the next section

The developer has asked owners of other regions to open an issue with the checksum its installer shows, without uploading any game files. So support for more regions may come later. Nothing is promised.

The Xbox 360 Ports, and Which One to Use

The PS3 port is new. The Xbox 360 side has been going since August, and it has more than one project. All of them use ReXGlue, the toolkit behind most recent 360 ports.

  • Asura's Wrath Recompiled came first. It has Windows and Linux builds from September, plus an experimental Android build we cover below. Its author says progress has slowed. Since 7 November its page has pointed PC players to the next project, which it says performs better.
  • The "PC version" package is the one that author recommends. It is Windows only, and it needs a processor with AVX2 and a DirectX 12 or Vulkan graphics card. A small installer downloads the port's program files, about 1.6 GB, then installs the game from your own Xbox 360 disc image. The title update and DLC are optional. It updates itself when a new version comes out. Linux test builds have started to appear, marked as prereleases.
  • A third project builds the port on your own PC from your disc image, much like the PS3 port does. Its releases carry no ready made program.

If you own the 360 version and play on Windows, start with the PC version package. The original project's own author recommends it, which is about the strongest endorsement this scene offers.

One to skip. A fork of the original project has posted a release it calls version 1.0.0. It is a third party's rebuild with almost no history, and its "1.0" has nothing to do with the PS3 port's 1.0. Stick with the original projects.

On Android, it is a maybe at best. Asura's Wrath Recompiled published an arm64 APK in September. It is the only Xbox 360 recompilation we know of with an Android build. But its author calls it experimental, its tracker has an open crash report, and nobody has published a result from a Retroid or an Odin. We have the details in our guide to recompiled games on Android.

All three 360 projects now sit on our Xbox 360 recompiled games list.

Fake Downloads Are Already Appearing

About ninety minutes after the PS3 port's release, a new repository appeared under an unrelated account. Its description read like an unfilled template, with {title} placeholders where a name should be. Pages like that are a common trick for pushing malware at people searching for a trending download. A real port does not need a template description.

A few rules keep you safe with any of these projects:

  • Get each port from its own project page only. Never use a "utility", a "launcher" or a re-upload on another account.
  • No version of this game needs you to download game files. If something offers them, it is not one of these projects.
  • Know which warning is normal. An unsigned installer that triggers a SmartScreen warning is normal for a hobby project. Being asked to turn off your antivirus is not.

What You Need

For the PS3 port:

  • Your own European PS3 disc of Asura's Wrath, as a PS3_GAME folder or an already decrypted disc image. If you need a drive that can read PS3 discs on a PC, our guide to Blu-ray drives that read PS3 discs covers which ones work.
  • The game's program file in decrypted form. The port will not decrypt anything, because that would mean shipping Sony's keys, and it will not help you do it.
  • Optionally, update 1.02 and the DLC, already installed and decrypted.
  • A PC that can build it. Windows 10 or 11, or Linux with recent Mesa drivers. A processor with at least 4 threads. A graphics card with OpenGL 4.5, which covers any recent NVIDIA, AMD or Intel. About 6 GB free for the build tools and the build.

For the Xbox 360 PC version package:

  • Your own Xbox 360 disc image of the game.
  • Windows 10 or 11, a processor with AVX2, a DirectX 12 or Vulkan graphics card, and about 10 GB free.

Frequently Asked Questions

Is there an official PC version of Asura's Wrath?

No. Capcom only released it on PS3 and Xbox 360 in 2012, and it has never been re-released or remastered. Every way of playing it on PC is unofficial.

Does the PS3 port work with the North American disc?

Not yet. Version 1.0 only accepts the European release, BLES01227, because other regions have a different program. The developer has asked owners of other versions to report them, so that could change.

Do I need RPCS3 or PS3 firmware?

No. The port runs the game's own code natively and decodes the game's audio itself, so it needs neither an emulator nor PS3 firmware. It does need your game files already decrypted, which it will not do for you.

Can I play it on a Steam Deck?

There is an install path. The Linux package builds the port inside a container on SteamOS, which takes one to two hours, and then creates a Game Mode shortcut. The developer says it has had no performance testing yet, so nobody knows how well it runs.

Does it support trophies?

Yes. Version 1.0 includes all 53 trophies, with pop ups in game and a list in the launcher. The port stores them itself, and they are not connected to PSN.

Can I play Asura's Wrath on an Android handheld?

Only experimentally. An Xbox 360 recompilation of the game has an Android build, but its author calls it experimental, it has an open crash report, and no handheld results have been published. The PS3 port has no Android build.

Is it safe to download?

We inspected both packages without running them. We found the full source code and nothing that downloads from unexpected places. But as of 17 November the published checksums do not match the downloads, the installer is unsigned, and nobody but the developer has confirmed it runs. We would wait for the checksums to be fixed.

Is it finished?

The developer calls it 1.0 and says the main story, the update and the DLC are all playable. Windows is the main platform. Linux and Steam Deck support are new and lightly tested, 120 fps is experimental, and some stutter is expected the first time you play each area.

Which is better, the PS3 port or the Xbox 360 ports?

It depends on the disc you own, because each port only works with its own version. The PS3 port has more features, including trophies, 90 fps and a Steam Deck script. The 360 PC version package is Windows only, but it has been out longer and more people have played it.


Written 17 November 2026 from the PS3 port's release notes, its README and the documentation inside its downloads, and from the Xbox 360 projects' own pages. We inspected the PS3 port's packages but did not run them, and we have not benchmarked any version on any hardware. Every frame rate quoted is the developer's own. This page will be dated again rather than quietly rewritten when things change.

Related reading